Projects
In 2019, Zillers Motorcycles started working on the BMW R nineT project.
The inspiration of the project was the aviation theme, which we tried to convey through some ideas. The project took us a year of hard work to finish this motorcycle. The project was based on a chassis and engine from a 2016 BMW R nineT bike.
The entire body kit of the motorcycle is made of aluminum. The front part around the headlight and behind the front wheel is 3D printed.
Wheels are 18 inch machine chiseled. They follow design of aircraft turbines.
The front and rear suspensions are converted to pneumatic, which makes it possible to lower the motorcycle directly on the asphalt without a sidestand. To do this, an amplifier is made inside the body kit that takes all the weight on itself.
The hydraulic system of the cartridges is preserved in the front racks, which makes it possible to maintain the correct operation of the shock absorbers.
The rear pneumatic shock absorber has an additional circuit for pumping in the opposite direction, and thus replaces the hydraulic damper. There are six buttons on the steering wheel to control the air suspension.
The main clutch and brake machines, as well as the control panels located on the steering wheel, are CNC machined.
The front headlight is made specifically for the entire design and has a Central lens with an angel eye around it. Optics is Japanese sourced.
At the rear of the motorcycle is a retractable glove compartment with integrated brake light and turn signals. In the glove compartment there is a socket for charging the motorcycle and phone.
The main difficulty of the project was the color selection. Body kit was repainted three times until we achieved the desired result.
The redesigned exhaust and exclusive intake system required additional customization on the dynostand. Proper engine setup is like cherry at the end of this project.
In 2019, Zillers Motorcycles started working on the BMW R nineT project.
The inspiration of the project was the aviation theme, which we tried to convey through some ideas. The project took us a year of hard work to finish this motorcycle. The project was based on a chassis and engine from a 2016 BMW R nineT bike.
The entire body kit of the motorcycle is made of aluminum. The front part around the headlight and behind the front wheel is 3D printed.
Wheels are 18 inch machine chiseled. They follow design of aircraft turbines.
The front and rear suspensions are converted to pneumatic, which makes it possible to lower the motorcycle directly on the asphalt without a sidestand. To do this, an amplifier is made inside the body kit that takes all the weight on itself.
The hydraulic system of the cartridges is preserved in the front racks, which makes it possible to maintain the correct operation of the shock absorbers.
The rear pneumatic shock absorber has an additional circuit for pumping in the opposite direction, and thus replaces the hydraulic damper. There are six buttons on the steering wheel to control the air suspension.
The main clutch and brake machines, as well as the control panels located on the steering wheel, are CNC machined.
The front headlight is made specifically for the entire design and has a Central lens with an angel eye around it. Optics is Japanese sourced.
At the rear of the motorcycle is a retractable glove compartment with integrated brake light and turn signals. In the glove compartment there is a socket for charging the motorcycle and phone.
The main difficulty of the project was the color selection. Body kit was repainted three times until we achieved the desired result.
The redesigned exhaust and exclusive intake system required additional customization on the dynostand. Proper engine setup is like cherry at the end of this project.
